In the daily operation of the air compressor, there is often an air compressor oil leakage phenomenon, the appearance of lubricating oil overflow. Air compressor oil leakage failure causes are as follows:

1, oil seal off or oil seal defect oil leakage

2、Loose spindle leads to oil seal oil leakage

3, combined surface leakage, inlet and return oil pipe joints loose

4, belt installation is too tight resulting in wear of the main shaft tile

5, casting or processing defects can also cause oil leakage of air compressor phenomenon

Air compressor oil leakage fault judgment and elimination methods:

1, air compressor oil leakage, pay attention to observe the oil seal part, check whether the oil seal is cracked, whether the inner lip is cracked or flap. One of the above conditions should be replaced; check whether the oil seal and spindle bonding surface scratches or defects, there are scratches and defects should be replaced, check whether the oil return is smooth, the oil return is not smooth so that the crankcase pressure is too high, resulting in oil seals leakage or dislodgement, we must ensure that the return pipe the minimum pipe diameter, and does not distort, do not bend, smooth oil return, check the oil seals, the box with the size of the substandard to be replaced.